Symbol
Function
Heat-up Indicator
The display shows the temperature in the
oven.
Fast Heat Up
The function is on. It decreases the heat
up time.
Weight Automatic
The display shows that the automatic
weight system is on or that weight can be
changed.
Heat + Hold
The function is on.
BEFORE FIRST USE
WARNING! Refer to Safety chapters.
INITIAL CLEANING
Remove all accessories and removable shelf
supports from the oven.
Refer to "Care and cleaning" chapter.
Clean the oven and the accessories before the first
use.
Put the accessories and the removable shelf
supports back to their initial position.
FIRST CONNECTION
When you connect the oven to the mains or after
the power cut, you have to set the language, the
display contrast, the display brightness and the
time of the day.
1. Press
or
to set the value.
2. Press
to confirm.
SETTING THE WATER HARDNESS
The table below shows the water hardness range
(dH) with the corresponding Calcium deposit and
the quality of the water.
Water hardness
Calcium deposit
(mmol/l)
Calcium deposit
(mg/l)
Water classifi-
cation
Class
dH
1
0 - 7
0 - 1.3
0 - 50
Soft
2
7 - 14
1.3 - 2.5
50 - 100
Moderately
hard
3
14 - 21
2.5 - 3.8
100 - 150
Hard
4
over 21
over 3.8
over 150
Very hard
When the water hardness exceeds the values in the
table, fill the water drawer with bottled water.
1. Take the 4 colour change strip supplied with
the steam set in the oven.
2. Put all the reaction zones of the strip into the
water for approximately 1 second.
Do not put the strip into the running water.
8