
Problem
Possible cause
Remedy
The oven does not heat up.
The automatic switch-off is on.
Refer to "Automatic switch-
off".
The oven does not heat up.
The Child Lock is on.
Refer to "Using the Child
Lock".
The oven does not heat up.
The door is not closed correct-
ly.
Fully close the door.
The oven does not heat up.
The fuse is blown.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
The lamp does not operate.
The lamp is defective.
Replace the lamp.
The display shows F111.
The plug of the core tempera-
ture sensor is not correctly in-
stalled into the socket.
Put the plug of the core tem-
perature sensor as far as pos-
sible into the socket.
The display shows an error
code that is not in this table.
There is an electrical fault.
• Turn off the oven with the
house fuse or the safety
switch in the fuse box and
turn it on again.
• If the display shows the er-
ror code again, contact the
Customer Care Depart-
ment.
Steam and condensation settle
on the food and in the cavity of
the oven.
You left the dish in the oven for
too long.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo".
The demo mode is activated.
Refer to "Basic Settings" in
"Daily use" chapter.
The descaling procedure is in-
terrupted before it finishes.
There was a power cut.
Repeat the procedure.
The descaling procedure is in-
terrupted before it finishes.
The function was stopped by
the user.
Repeat the procedure.
There is no water inside the
grill- / roasting pan after the
descaling procedure.
You did not fill the water draw-
er to the maximum level.
Check if the a descaling
agent / water is present in the
water drawer body.
Repeat the procedure.
There is dirty water on the bot-
tom of the cavity after the des-
caling cycle.
The grill- / roasting pan is on a
wrong shelf position.
Remove the residual water and
the descaling agent from the
bottom of the oven. Put the
grill- / roasting pan on the first
shelf position.
45