5
Release the lock-
ing system to remove
the glass panels.
90°
6
Turn the two fas-
teners by 90° and re-
move them from their
seats.
2
1
7
Carefully lift (step
1) and remove (step
2) the glass panels
one by one. Start
from the top panel.
Clean the glass panels with water and soap.
Dry the glass panels carefully.
Installing the door and the glass panels
When the cleaning is completed, install the
glass panels and the oven door. Do the above
steps in the opposite sequence.
1 2
3
Make sure that you put the glass panels (1, 2
and 3) back in the correct sequence. The mid-
dle panel (2) has a decorative frame. The
screen-printing zone must face the inner side
of the door. Make sure that after the installation
the surface of the glass panel frame (2) on the
screen-printing zones is not rough when you
touch it.
Make sure that you install the top panel in the
seats correctly.
What to do if…
Warning!
Refer to the Safety chapters.
19
www.zanussi.com
Summary of Contents for ZOP38903
Page 69: ...69 www zanussi com ...
Page 70: ...70 www zanussi com ...
Page 71: ...71 www zanussi com ...