9
Display
The display (
7
) shows the following information:
After selecting a programme the duration of
the selected programme appears on the dis-
play in hours and minutes.
During the programme, the time remaining is
updated every minute.
After having pressed button
8
and started the
cycle, the light
9
lights up (and stays on).
The Delayed start appears on the display for a
few seconds, then the duration of the
previously selected programme is displayed.
The delay time value decreases by one unit
every hour and then, when 1 hour remain,
every minute.
The incorrect option selection is indicated by
the message Err displayed for few seconds
and by flashing of the light button
8
.
2.00
In the event of operating problems, some
alarm codes can be displayed, (see paragraph
“What to do if”)
The End of programme is indicated by a flas-
hing zero «
0
». The light
9
goes off and the
door can be opened.
«Stand by»
If your laundry is not removed during 10
minutes after the programme is finished, the
backlight of the display switches off and the
energy saving system will be enabled.
Only the button
8
pilot light is blinking to
indicate that the appliance has to be switched
off.
By pressing any button the appliance will come
out from the energy saving status and you
could set another washing programme or swich
off the appliance.
0
E20
132962620_en.qxd 26/07/2008 12.20 Page 9
