31
The drain hose must not be kinked.
Electrical connection
Information on the electrical connection is
given on the rating plate on the inner edge of
the appliance door
Check that your domestic electrical installation
can take the maximum load required, also
taking into account any other appliances in
use.
Caution!
Connect the machine to an earthed socket.
Caution!
The manufacturer declines any
responsibility for damage or injury through
failure to comply with the above safety
precaution.
Caution!
The power supply cable must be easily
acessible after installing the appliance.
Caution!
Should the appliance power supply cable
need to be replaced, this MUST be carried
out by our Service Centre.
NOTE
Please ensure that when the appliance is
installed it is easily accessible for the engineer
in the event of a breakdown.
Building-in
This appliance has been designed to be built
into the kitchen furniture. The recess should
have the dimensions shown in picture A.
When installing the appliance into the kitchen
furniture ensure, if possible, the hoses are
placed in either of the two recesses on the
back of the appliance. This will help to prevent
the hoses from becoming kinked or trapped.
Preparation and assembly of the door
The machine is originally pre-arranged for the
assembly of a door opening from right to left.
In this case it is sufficient to screw in the
hinges (1) and the counter-magnet (6) provided
with the appliance, at the right level (Fig. B).
4
1 2
3
6
1
2
3
5
7
8
B
820 min
600 min.
600
596
41
6
176
,5
81
8
541
195
490
160
120
90
8
515
165
A
600
132962620_en.qxd 26/07/2008 12.21 Page 31
