22
(AS 235-335-340)
The following
are supplied:
1.
Fixed upper and side protections for evaporator and condensing unit, secured by
locking screws.
2. External fan protections placed on the evaporating and condensing units, secured
with screws.
The following
are supplied:
a.
Protection of fans (belonging to motors) against high power absorption; with
automatic reset.
b.
High pressure switch (only for special components) to protect against excessive
pressure; with automatic reset.
Clean the unit carefully. Remove any dust, foreign substances and dirt possibly deposited during handling.
Use detergents and degreasers.
Connect the unit after checking the panel components.
When choosing the protective device take the following into consideration: should the
at installation point be higher than 10 KA, install a limiting device which reduces its peak value to 17 KA.
