ZANOLLI SYNTHESIS 08/50 V PW GAS, Manual For Installation

Page: 6 / 68

2. HOW TO USE THIS MANUAL
6 SYNTHESIS GAS
2. HOW TO USE THIS MANUAL
The paragraphs marked with this symbol contain indications
essential to safety. They must all be read by installers, the end user
and any employees that use the machine. Manufacturer does not
assume any responsibility for damage or injury incurring as a result
of ignoring the safety criteria outlined in these paragraphs.
This symbol applied to various surfaces of the machine,
shows that these can reach very high temperatures and should never
be touched without taking the necessary precautions.
This symbol, applied to various points on the machine,
serves to warn the user of the presence of a non-
insulated “high
voltage hazard” inside the machine’s casing there being enough
power to constitute a fire risk or to electrocute a person.
The paragraphs marked with this symbol contain important
information to avoid causing damage to the machine. It is in the users
own interests to read these paragraphs carefully.
It is recommended that this installation, instruction and service
manual be kept in close proximity to the equipment so that it can be easily
and quickly consulted. The manual must accompany the equipment if it is
resold as it cannot be considered complete and safe without it.
Take note of the manual code and version shown on the back cover. In
the event that this copy is lost or destroyed, you can order another using
these
This manual is made up of a number of chapters. They should be
read in their entirety by both installers and service personnel as well as by
the end user to ensure
safety of use and to get the best results from this
product.
Some useful indications for the consultation of each chapter are given
below.
Chapter 3 contains the reference standards of the oven and directions
for the proper use of the same.
Chapter 4 contains all the information needed to install the machine.
These are mainly aimed at specialized personnel but should be read by the
end user beforehand so as to predispose the environment where the
machine will be operated for the installation.