OPERATION
20
Synthesis
06/40V GAS
where:
A = Cooking temperature
B = Cooking time in minutes and seconds
C = Operating condition of burner
(Max =high flame, Min = low flame, --- = flame off).
5.3 SETTINGS
5.3.1 Temperature adjustment
The oven temperature can only be adjusted when the oven is on.
The oven heats up to and then remains at the set temperature until
it is switched off.
When the oven is on, the real temperature of the cooking chamber
is indicated; press the parameter value increase key
to
display the set temperature.
See the “Programming” paragraph to learn how to adjust the set
temperature.
The intensity of the flame varies automatically and adjusts
according to the operating conditions in the Max, Min or ---
positions indicated on the display.
5.3.2 Cooking time adjustment
The desired cooking time is set directly by the user, and is directly
connected to the relevant conveyor speed, which is automatically
controlled by the electronic circuit board.
When the oven is switched on, the conveyor is still and the
cooking time flashes on the display.
Press the conveyor start/stop key
to activate the conveyor.
Conveyor can be started or stopped at any time using the key
.
When the conveyor is still, the cooking time flashes.
When the oven is on, the conveyor can be adjusted manually to reach maximum speed by
pressing the key
for 4 seconds. (Fig.2).
Press the same key again to return to the previous setting.
See the “Programming” paragraph to set the cooking time.
A
B
C
1
2
