Zander Aachen MINOS SD1E, Operating Instructions Manual

Page: 5 / 40

5
Safety Relay MINOS SD1E EN
4. Appropriate use
MINOS SD1E is a safety emergency stop
relay for monitoring e.g. emergency stop
buttons, safety doors and light curtains. The
modules are also certified for operation in
furnaces and vessels according to
EN 50156-1 / EN 746-2.
The approved operating parameters for use
must be complied (see chapter 20 "Technical
data").
A risk assessment should be carried out on
the machine before using the device. For
example, according to:
EN ISO 13849-1, Safety-related parts of
control systems, Appendix A
EN ISO 12100, Safety of machinery - General
principals for design - Risk assessment and
risk reduction
IEC 62061, Safety of machinery - Functional
safety of safety-related electrical, electronic
and programmable electronic control sys-
tems.
Additional requirements may have to be
considered depending on the type of machine
or plant.
Appropriate use also includes compliance
with:
EN ISO 13849-1, Safety-related parts of
controllers,
EN 60204-1, Electrical equipment in
machines.
For further information please
refer to the above mentioned
documents.
ATTENTION!
•
The user is responsible for integrating the
device into a safe overall system. For this
purpose, the overall system has to be
validated, e.g. according to
EN ISO 13849-2
•
If a operating instruction is enclosed with
the product, then the specifications given in
the operating instruction are applicable