Z3 Technology Z3-MVE-40 User Instructions Download Page 2

Page: 2 / 61

DOC-USR-0068-02

_______________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

Revision History

Version

Date

Change Note

Author

2.00.21j

05/19/14

Initial Version

2.01.30.07

02/18/15

Updated screenshots, added description of new modes, new functions,
and control through LCD.

2.01.30.09

04/16/15

Added RTMP/RTSP descriptions, changed description of how MPTS
works, added mention of ZFinder. Added closed caption description.
Updated screenshots.

2.09.03

05/21/15

Updated screenshots.

2.09.03a

05/31/15

Added mention of UDP support in MPTS, DNS support.  Modified
description of viewing RTP streams in Section 6.14.  Added mention of
need to click “update” twice in FireFox in Section 6.15.  Updated
screenshots.

2.09.07

07/19/15

Added TSRTP. Removed B-frame performance limitation. Added
TSFILE, Aux TS File support. Updated screenshots.

RC/KA

Summary of Contents for Z3-MVE-40






























































Search results

Summary of Contents for Z3-MVE-40

Reviews:

Related manuals for Z3-MVE-40

Brands by name

Popular brands

Z3 Technology Z3-MVE-40, User Instructions

Search results

Summary of Contents for Z3-MVE-40

Reviews:

Related manuals for Z3-MVE-40

Brands by name

Popular brands