30
DOC-USR-0080-01
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
(9)
Confirm “Input Interface” is Ethernet.
(10)
Verify “Input Format” and “IP: Port” matched what the source is streaming to.
(11)
Confirm “Output Interface” is set to “SDI.”
(12)
Click the “MVE” Flag (if a DME-01, MVE-02, MVE-10, MVE-20 or an MVPR-01 is being used as the
Encoder, you can click this button to allow for a faster decode). Your settings should match the
following:
(13)
Click “Start Decoder.”
(14)
If you have not done so already, return to the Encoder system and click “Start.”
(15)
After a few seconds, you should see video on the monitor.
(16)
You can also view the content using VLC. Open VLC and us the RTSP URL as described in Section 6.5
on page 15.
Figure 32 Z3-MVE-10 Example Decoder Settings for End-to-End Streaming
