29
DOC-USR-0080-01
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
7.14
Configure the Decoder
(7)
Navigate to the Decoder system controls. The first step is to switch to “Decoder” mode. This can be
done by changing “Operating Mode” in the lower right corner:
(8)
Once you do this, the description at the top right will change from “Z3-MVE-10 Encoder” to “Z3-MVE-
10 Decoder”:
Figure 30 Z3-MVE-10 Operating Mode Selector
Select
“Decoder”
Figure 31 Z3-MVE-10 Decoder Configuration Menu
