Z3 Technology Z3-LEO-1X User Instructions Download

Page: 8 / 81

Z3-LEO-1X User Instructions

DOC-USR-0217-02

______________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

2.0

FEATURES

▪

Encode modes of operation: HEVC/H.265, H.264 and MJPEG

▪

Low bandwidth, low latency video encoding

▪

Simultaneously output two different resolutions from a single video source

▪

Remote camera control via HTTP-based interface or pass VISCA camera control commands over IP

▪

Additional Interfaces include Micro SD Card, USB and KEL Connector

▪

RS232, alarm input and output interfaces available internally

▪

Supports streaming in MPEG-2 TS (UDP), RTP, RTSP, RTMP* and TSRTP

▪

Supports unicast and multicast streaming

▪

Record a compressed .ts/.mp4 file to a Micro-SD or USB storage device

▪

Record a JPG snapshot while video streaming

▪

ONVIF

Profile S and Profile T compliant

▪

Compatible with the ZEUS

DMD-4K decoder (also available from Z3 Technology)

▪

HTTP-based configuration software for user-friendly configuration, control and update

▪

Operating Temp: -5 to 70 degrees C at 20-80% relative humidity (non-condensing)

▪

Storage Temp: -10 to 60 degrees C at 20-80% relative humidity (non-condensing)

▪

Weight: 11g

▪

Encoder Board Size: 60 x 32 x 6 mm (2.36 x 1.26 x 0.24 in)

2.1

Supported Resolutions

2.1.1

Supported Input Resolutions

The Z3-LEO-1X supports Sony LVDS input from a KEL connector.

Supported Input Resolutions:

1080p120, 720p120, 720p240

1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97, 1080p25

720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25

2.1.2

Supported Output Resolutions

The Z3-LEO-1X supports simultaneous output of up to three streams encoded at different resolutions,
frame rates and bitrates. Supported stream resolutions are:

1080p (2MP), 1280x1024, 720p (1MP), 480p, 576p, 1024x576, 704x576, 640x480, 640x360, 420x380,

Summary of Contents for Z3-LEO-1X


















































































Search results

Summary of Contents for Z3-LEO-1X

Reviews:

Related manuals for Z3-LEO-1X

Brands by name

Popular brands

Z3 Technology Z3-LEO-1X, User Instructions

Search results

Summary of Contents for Z3-LEO-1X

Reviews:

Related manuals for Z3-LEO-1X

Brands by name

Popular brands