Z3 Technology Z3-LEO-1X User Instructions Download

Page: 45 / 81

Z3-LEO-1X User Instructions

DOC-USR-0217-02

______________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

(8)

A pop-up window appears with a reminder that changes to network settings require a reboot in order
to take effect. Click

to reboot the unit. Wait 45-60 seconds for the unit to boot up.

(9)

You can return to the use of DHCP by checking

Use DHCP

in the System Setup tab and saving that to

the preset.

8.5.3

Open the User Interface Using ZFinder

(1)

Run the ZFinder PC Utility on your Windows PC. The ZFinder window appears. ZFinder does a scan of
the network and lists the location of all Z3 systems connected to the network. The Z3-LEO-1X
appears with your manually entered IP address.

(2)

Select the Z3-LEO-1X.

(3)

Click

Open Device

to reach the user interface.

8.5.4

Open the User Interface Manually

(1)

You can also access the user interface by m

anually typing your unit’s static IP address into a web

browser on any computer connected to the same network as the unit.

8.6

Upgrade Firmware

Firmware upgrades for the Z3-LEO-1X are available for download

Z3Cam-4K.Z3technology.com

(1)

In the System Setup Tab, click the

Update device firmware

button.

Note:

If this button is not selectable, it is because the encoder is running. If you click

Stop

at the bottom of the

screen, the

Update device firmware

button will become active.

Figure 43 Updating Device Firmware

Click here

Summary of Contents for Z3-LEO-1X


















































































Search results

Summary of Contents for Z3-LEO-1X

Reviews:

Related manuals for Z3-LEO-1X

Brands by name

Popular brands

Z3 Technology Z3-LEO-1X, User Instructions

Search results

Summary of Contents for Z3-LEO-1X

Reviews:

Related manuals for Z3-LEO-1X

Brands by name

Popular brands