Z3-LEO-1X User Instructions
DOC-USR-0217-02
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
33
6.7
Setting NTP/PTP
The Z3-LEO-1X has support for NTP to set the time on the unit. If you require the system time to be set
do the following
(1)
Load the web UI of the unit and switch to the System Setup tab. Click the go button next to Set NTP.
(2)
Select TRUE from the Enable NTP dropdown.
(3)
Select the desired timezone for the unit form the Time Zone dropdown.
(4)
Enter an NTP server address. The default is 128.138.141.172 (NIST).
(5)
Click the change button. NTP is now enabled and your system clock will be adjusted.
Figure 28 Setting up NTP
The Z3-LEO-1x also supports PTP. Please refer to the PTP app note to use this feature: DOC-USR-0223-
01_PTP-Testing_APP_Note
6.8
Record to Micro SD
The Z3-LEO-1X supports writing encoded video to a storage device connected to the Micro-SD slot in .ts
and .mp4 file format.
(1)
Insert a microSD card into the slot on the side of the camera.
Note:
The storage device must be formatted in FAT32, VFAT, EXT3, or EXT4 format.
(2)
Return to the user interface, and if necessary, click on the
Stop
button in the
Channel Controls
section of the user interface CH1 tab or the
Stop All
button in the lower right corner of the screen of
any tab.
(3)
Verify the
Output Resolution
is set to
Follow Input
to output a HD stream. If a lower resolution
output is desired, select this in the dropdown menu and resizing will occur.
(4)
Select the
Video Codec
you would like to use for your video encoding.
(5)
Under Output Setup, select
TSFILE
from the
Output Format
dropdown menu.
