DOC-USR-0077-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
35
Aux TS File Enable
(UDP Only)
False
True
For UDP streaming only. If UDP is being
streamed, this allows the same UDP stream
to be saved to a ts file. The name of the
file is specified in “Aux TS File Location.”
Aux TS File Location
(UDP Only)
/tmp/aux1.ts
Appears if “Aux TS File Enable” is set to
“True.” Specifies where to save the TS file.
For example, if a USB drive is connected,
the value “/media/sda1/encode_4k2k.ts”
could be specified.
Video PID (UDP Only) 0 – 8191 (
220
)
PID assigned to video in the TS stream.
PCR PID (UDP Only)
0 – 8191 (
520
)
PID assigned to PCR in the TS stream.
PMT PID (UDP Only)
0 – 8191
(31)
PID assigned to PMT in the TS stream.
TS Rate (UDP Only)
125K – 60000K (
20000K
)
The rate of the transport stream. Normally,
this value should be set to 1.25 * (video
b audio bitrate). This can be set to
higher values to allow leeway for times
when many bits are needed to encode. This
can be especially useful for ensuring smooth
playback at lower bit rates.
stop
Stop current encode session.
start
Start encode session.
update
Not supported in this release.
clone
Duplicate CH tab (can be used to quickly
copy CH1 values to CH2, for example).
delete
Used to delete excess tabs created by Clone.
(status)
IDLE, STOPPED, RUNNING,
POLLING
Current status of the encoder. “POLLING”
indicates “start” was pressed and the
encoder is waiting for valid input data to be
detected.
Note 1: GOP Sizes Supported:
10, 12, 15, 25, 30, 50, 60, 100, 120, 200, 240 frames
