DOC-USR-0077-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
25
(10)
After clicking “Ok”, power off the Z3-HE4K-R and power it back on.
(11)
After the green “ready” light comes up, retype the IP address of the Z3-HE4K-R into the browser.
You should then see the decoder settings come up with “serial_menu” as the preset used.
*Note:
It is important to retype the IP address (or to refresh the browser, or exit the browser and
reenter it). Not doing so could lead to stale data being used and unpredictable operation
.
(12)
Click on the “CH1” tab. You will see the settings for CH1 decode:
(13)
After making sure the file “4kdemo.ts” is in a USB drive connected to the top USB port, click
“start”. You should then see 4K video on the screen.
Figure 30 Decoder Initial Menu
Figure 31 Decoder CH1 Settings
