DOC-USR-0056-09
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
25
(13)
Click on the “CH1” tab to reach the settings options for Channel 1 decode.
(14)
In this example, the content loaded on the USB drive connected to the unit is a file titled
“4kdemo.ts”. Verify the “Input Interface” is set to “TSFILE”.
(15)
Set the location to “/media/sda1/4kdemo.ts” where “/media/sda1/” provides the path to the USB1
port and “4kdemo.ts” matches the file name of the encoded content on the USB drive.
(16)
Click the “start” button to begin decoding. Your decoded 4K video will appear on the 4K monitor.
Changing Back to Encoder Mode
8.3
To return to encoder mode, stop any currently running decoding and repeat the steps in Section 8.2 after
selecting “Encoder UltraHD from the “Operating Mode” dropdown menu. A reboot will be required.
*Note:
In some cases, some settings might not be filled in. If this is the case, simply select the
“encoder factory default” preset to restore all default settings.
Figure 23 Decoder CH1 Tab
