DOC-USR-0056-09
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
23
Set Decoder Mode
8.2
(6)
Select “Decoder” from the “Operating Mode” dropdown menu in the lower right corner of the
screen.
(7)
Once you do this, the System Setup tab will appear with decode settings.
(8)
Changes cannot be saved to the factory default preset. At the bottom of the screen, select
“serial_menu” from the “preset” dropdown menu .
Figure 19 System Setup Tab
Change to
“Decoder”
Figure 20 Changing a Preset
Change to
“serial_menu”
