HE4K-DCK-10 User Instructions
DOC-USR-0123-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
65
2160p (8MP), 1440p (4MP), 1080p (2MP), 1280x1024, 720p (1MP), 480p, 576p, 1024x576, 704x576,
640x480, 640x360, 420x380, 352x576, 352x288, 352x240, 320x240, and 320x180
Follow input
“Follow input” = Generate encoder resolution based on capture resolution detected
10.7
The CH2 & CH3 Tabs (Channels 2 & 3)
The HE4K-DCK-10 supports simultaneous encode into multiple different resolutions and bitrates. Each
output stream can be set using a separate Channel tab. See the CH1 Tab section for detailed
descriptions of available settings on the CH2 and CH3 tab. If these tabs are not present, you can create
a them by clicking on the “+” tab. Only three channels are supported.
The maximum performance for two channels is one 2160p30 plus one 720p30 stream.
CH2 Default:
Parameter
Options (default in bold)
Description
Encoder Setup
Output Resolution
320x180 – 12560x1440
(1280x720)
Follow Input
The encode resolution. If this resolution is different
from the capture resolution (3840x2160), resizing
will occur.
Video Bitrate
2K – 40M (
2M
)
Textbox for entering video bitrate.
CH3 Defaults:
Parameter
Options (default in bold)
Description
Encoder Setup
Output Resolution
320x180 – 2560x1440
(720-480)
Follow Input
The encode resolution. If this resolution is different
from the capture resolution (3840x2160), resizing
will occur.
Video Bitrate
2K – 100M (
2M
)
Textbox for entering video bitrate.
