Z3 Technology HE4K-DCK-10 User Instructions Download Page 64

Page: 64 / 76

HE4K-DCK-10 User Instructions

DOC-USR-0123-01

______________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

Password

(RTMP Only)

Enter a valid Wowza password.

Telop Enable

True

False

Enables Telop display text over video.

Telop Display Text

ENCDEV

Textbox for entering display text.

Telop Location

Top Left

Top Center

Top Right

Bottom Left

Bottom Center

Bottom Right

Sets screen location of display text.

Telop Text Size

16 px

32 px

64 px

Sets size of display text in pixels.

Channel Controls

Stop Button

Stop current encode session for Channel 1. Encode
must be stopped in order for settings to be altered.

Start Button

Start encode session for Channel 1.

Delete Button

Removes channel instance for encoding.

status

!Not running, IDLE,
STOPPED, RUNNING,
POLLING

Current status of the encode process.

IDLE

indicates no valid input data is present.

STOPPED

indicates that the unit is not currently

encoding. Must be in this mode to make any
configuration changes.

POLLING

indicates “start” was pressed and the

encoder is waiting for valid input data to be
detected.

RUNNING

indicates the unit is currently encoding.

Error statuses will be preceded by an exclamation
point and include a description of the error.

Note 1: Encode Resolutions Supported:

Summary of Contents for HE4K-DCK-10













































































Search results

Summary of Contents for HE4K-DCK-10

Reviews:

Related manuals for HE4K-DCK-10

Brands by name

Popular brands

Z3 Technology HE4K-DCK-10, User Instructions

Search results

Summary of Contents for HE4K-DCK-10

Reviews:

Related manuals for HE4K-DCK-10

Brands by name

Popular brands