HE4K-DCK-10 User Instructions
DOC-USR-0123-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
63
(UDP/TSRTP/TSFILE
Only)
PCR PID
*
(UDP/TSRTP/TSFILE
Only)
0 – 8191 (
521
)
PID assigned to PCR in the TS stream.
PCR Interval
*
(UDP/TSRTP/TSFILE
Only)
(
50
)
Interval assigned to PCR in the TS stream in
milliseconds.
PMT PID
*
(UDP/TSRTP/TSFILE
Only)
0 – 8191 (
31
)
PID assigned to PMT in the TS stream.
Video Max Delay
*
(UDP/TSRTP/TSFILE
Only)
(300)
Sets encoder maximum video delay in milliseconds.
TS RATE
(UDP/TSRTP/TSFILE
Only)
125K – 20000K (
5000K
)
The overall bitrate of the transport stream.
Normally, this value should be set to 1.25 * (video
b audio bitrate). This can be set to higher
values to allow leeway for times when many bits
are needed to encode. This can be especially useful
for ensuring smooth playback at lower bitrates.
TS Lowlat Mode
*
(UDP/TSRTP Only)
False
True
Selecting “True” causes the TS muxer to instead
send packets out as soon as it receives them rather
than buffering them. This results in lower latency
at the expense of decreased network efficiency and
a less smooth bitstream. There is a limit of 5Mbps
for TS Lowlat Mode.
Must be set to “False” for stream to be compliant
with ISO 13818-1 systems specification for transport
stream timing.
Authentication
(RTMP Only)
Disable
Enable
If authentication is required within the Wowza
streaming server, select “Enable” to enter user
credentials.
User (RTMP Only)
Enter a valid Wowza user name.
