FV4K-DCK-1X User Instructions
DOC-USR-0127-07
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
66
10.0
SUMMARY OF OPTIONS
This section lists the different options that are available in the various menus and tabs for configuration of
your encoder.
10.1
The System Setup Tab
Parameter
Options (default in bold)
Description
Local IP Setup
Local IP Address w.x.y.z
(192.168.0.120)
Sets the static IP address of the unit.
Note that a “save” of these settings and a reboot is needed
for changes to this value to take effect. When in DHCP
mode, this field is not applicable.
Local Netmask
w.x.y.z (
255.255.0.0
)
Sets the netmask of the unit.
Note that a “save” of these settings and a reboot is needed
for changes to this value to take effect. When in DHCP
mode, this field is not applicable.
Default
Gateway
w.x.y.z (
192.168.0.1
)
Sets the network gateway to use for the unit.
Note that a “save” of these settings and a reboot is needed
for changes to this value to take effect. When in DHCP
mode, this field is not applicable.
DNS Server IP 1
w.x.y.z
(8.8.8.8)
Specifies the primary DNS server to be used for hostname
lookup when in static IP mode. When in DHCP mode, DNS
information is acquired from the DHCP server, and this
field is not applicable.
DNS Server IP 2
w.x.y.z
(8.8.4.4)
Specifies the secondary DNS server to be used for hostname
lookup when in static IP mode. When in DHCP mode, DNS
information is acquired from the DHCP server, and this
field is not applicable.
Use DHCP
Checked
Unchecked
Check this box to use DHCP to dynamically obtain an IP
address at start up.
Device Setup
