FV4K-DCK-1X User Instructions
DOC-USR-0127-07
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
62
Figure 72 ZFinder page showing “Available Networks” dropdown
(6)
Select the Wi-Fi network to connect to type in the password and click “Connect”. At this point close
the browser window and connect to the network you selected on your PC. Open ZFinder and look for
your encoder. If your encoder shows up, you are done and can now use your encoder via Wi-Fi. If
your encoder doesn’t show up in ZFinder make sure you are connected to the same network you
directed the encoder to connect to. It could be that the password entered is incorrect. If the
encoder fails to connect it will return to AP mode so look for the AP SSID on your PC and try to
connect to your network again. Note that currently only WPA1/WPA2 Personal authentication is
supported.
9.0
DECODE OPTIONS
9.1
PC Configuration for HD HEVC/H.265 Decode
Due to the advanced processing needed to support HEVC/H.265 decoding at 4K resolutions, a PC must
meet the following requirements:
▪
Nvidia GEForce GTX960 (desktop) or GTX960M (laptop) graphics card
▪
LAV Filters
6
version 0.63 or higher
6
LAV Filters is an open source program that allows playback of video and audio on a PC without installation of