FSDI-DCK-10 User Instructions
DOC-USR-0313-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
65
10.7
The CH2 & CH3 Tabs (Channels 2 & 3)
The FSDI-DCK-10 supports simultaneous encode into multiple different resolutions and bitrates. Each
output stream can be set using a separate Channel tab. See the CH1 Tab section for detailed descriptions
of available settings on the CH2 and CH3 tab. If these tabs are not present, you can create a them by
clicking on the “+” tab. Only three channels are supported.
The maximum performance for two channels is one 1080p60 plus one 720p60 stream.
CH2 Default:
Parameter
Options (default in bold)
Description
Encoder Setup
Output Resolution
320x180 – 1920x1080
(1280x720)
Follow Input
The encode resolution. If this resolution is different
from the capture resolution (1920x1080), resizing
will occur.
Video Bitrate
2K – 40M (
2M
)
Textbox for entering video bitrate.
CH3 Defaults:
Parameter
Options (default in bold)
Description
Encoder Setup
Output Resolution
320x180 – 1920x1080
(720-480)
Follow Input
The encode resolution. If this resolution is different
from the capture resolution (1920x1080), resizing
will occur.
Video Bitrate
2K – 40M (
2M
)
Textbox for entering video bitrate.
