FSDI-DCK-10 User Instructions
DOC-USR-0313-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
62
Only)
leave this value at 250. Certain decoders may
require a value similar to the video delay. If an
issue is encountered with a specific decoder, try
setting this value to the same value as the video
delay.
Output Setup
Output Format
RTP
RTSP
UDP
TSRTP
TSFILE
RTMP
Output format of the encoded IP stream.
RTP requires an SDP file for the receiver that
corresponds to the video codec used.
TSRTP streams TS over RTP.
RTMP is only supported with H264(AVC) selected as
the Video Codec.
Dest Address
192.168.x.y
(192.168.0.6)
The IP address of the destination of the encoded
stream.
Dest Port
0 – 9999 (
8600
)
The destination port that the encoder is streaming
to.
Output Device
(TSFILE Only)
Click this field to select the detected USB storage
device for .ts file destination.
File Prefix
(TSFILE Only)
MOV1_%F_%T_
Textbox to enter desired file name for .ts file.
Entered text will be followed by a number starting
with zero in the recorded file name.
%F will pull the current date, in year/month/day
format, into the file name.
%T will pull the current time, in 24-hour notation,
into the file name.
Max File Size
(TSFILE Only)
(1024M)
Sets the file size at which a new .ts file is started.
Video PID
*
(UDP/TSRTP/TSFILE
Only)
0 – 8191 (
221
)
PID assigned to video in the TS stream.
PCR PID
*
(UDP/TSRTP/TSFILE
0 – 8191 (
521
)
PID assigned to PCR in the TS stream.
