Z-World EG2110, User Manual

Page: 6 / 50

2 RabbitLink (EG2110)
When the RabbitLink is used to connect a target system to a network, communication between the
programmer’s PC and the RabbitLink is via TCP/IP. Windows-based PCs already support the
TCP/IP protocol and Ethernet adapters. There are two separate programs that run on the PC and
communicate with the RabbitLink:
• Dynamic C (version 7.03 or later)
• Rabbit Field Utility (version 2.0 or later)
NOTE: The firmware shipped with the RabbitLink model EG2110 is
version 2.05. This version of the firmware requires Dynamic C version 7.10
or later and/or version 2.20 or later of the Rabbit Field Utility.
Dynamic C is a complete interactive development environment that allows the user to create, load
and test programs on the target system. The Rabbit Field Utility (RFU) is a program that can be
used to download .bin program files to the target. The RFU provides a convenient means of updat-
ing software on a remote target.
1.2 RabbitLink Features
The following is a list of RabbitLink hardware and software features.
•
Rabbit 2000
™
microprocessor operating at 22.1 MHz.
•
RJ-45 Ethernet port compliant with IEEE 802.3 standard for 10Base-T Ethernet protocol.
•
2 serial ports.
•
3 status LEDs, labeled USER, ACT and LINK.
•
128K static RAM and 512K flash memory (two 256K flash chips).
•
Optional plastic enclosure and LED light pipes (enclosure and light pipes are included with the
tool kit, and are also sold separately).
• Firmware installed, ready to run.
• Downloadable firmware upgrades.
• Easy setup with DHCP or simple console commands.
• Password protection.
• Remote program downloading and debugging.