User’s Manual
37
E.4 E-Mail Commands
put <filename><size>
This command sends a binary file to the flash file system on the RabbitLink. There is a time-
out for this command: the data transfer begins no later than 60 seconds after the RabbitLink
senses there is no activity.
NOTE: It is faster and more efficient to transfer all files, including ASCII files,
as binary files.
filename
Identifies the file.
size
The number of bytes in the file being transferred.
mail <e-mail address>
<subject>
<body>
<ctrl-D>
The mail command sends an e-mail via the RabbitLink to the specified address.
address
The address to which the e-mail is sent; e.g.
.
subject
After receiving the mail command, the RabbitLink will accept the next
string as the subject of the e-mail
body
After receiving the subject of the e-mail, the RabbitLink will accept
strings that follow as the body of the e-mail.
ctrl-D
ctrl-D
(0x04) is the end of the e-mail.
set mail from <e-mail address>
This command sets the RabbitLink’s e-mail address. The address will be included in the
From line of all e-mail messages sent from the RabbitLink. Any error responses from the
SMTP server will be sent to this address.
name
E-mail address of the RabbitLink; e.g.
.
Summary of Contents for EG2110
