31
SET THE DESIRED GRILL TEMPERATURE
Use temperature dial to set desired temperature.
The temperature settings of the grill start from SMOKE to HIGH.
At those settings, the auger motor is running, and feeds pellets into the fire pot according to
set temperature.
HIGH, allows the grill to use its full power and can reach temperatures up to 500F or higher
grill using hardwood pellets.
Auger keeps running, fan is on and hot rod is OFF.
Automatic Re-Light
At any time during operation, would the grill temperature drop below 120F for 10 minutes,
the Digital Control Center will activate the Automatic Re-Light mode. This mode will
re-activate the Startup Cycle, and all its features.
If it fails, the display will show “Er2”.
The “Re-Light” mode aids in ensuring that a small fire is maintained during use in lower
temperatures. It also helps to re-light a fire that may have gone out when going from an
extremely HIGH temperature to LOW temperature. If it fails to ignite, the display will show
Er2.
Step 4. Shutdown Cycle
If the start button
is pressed down for 3 seconds the grill will activate its
Shutdown Cycle. The fan will be kept on to let the fire burn out and to cool down the grill.
After 5 minutes the grill control system will do an automatic temperature check.
During the Shutdown Cycle - the display, Auger motor and Hot rod will be OFF. Fan will be
ON.
