Z Corporation
Z406 System User Manual
44
Z Corporation Service (781)852-5050/(887)88-ZCORP
6.4 FLUSHING THE BINDER
1. If the machine is not in daily use, binder should be flushed bi-weekly for one
minute. This may be done by choosing the ‘Flush Binder’ option under the ‘Service’
menu in the ZPrint Software.
2. The LCD will display ‘Flushing Binder’
3. When finished, press the ‘Online’ button.
6.5 OILING THE FAST AXIS
Apply oil (supplied in the tool kit) to the pillow blocks located on the fast axis rail of the Printer
assembly. There is one located on the top rail and two located on the lower rail on the edge of
the carriage. This procedure should be done before every build.
Pillow Block
Pillow Block on
lower rail
PLEASE NOTE:
If machine will not be in use for more than a month, replace binder gallon
and color binder bottles with bottles of distilled water and flush the system for 5 minutes.
Then purge print heads for 2 minutes. Leave the distilled water in the machine. When ready
to use the Z406 3D Printer, replace distilled water with Z Corp. binder and flush system for
three minutes.
