manualshive.com logo in svg

Z Corporation Z 406, User Manual

Share
Download
Z Corporation Z 406 User Manual Download Page 22

Z Corporation 

Z406 System User Manual 

22

                                                                                              Z Corporation Service (781)852-5050/(887)88-ZCORP

 

 

 

2.  Use the vacuum to clean off the Filter found above the 

Overflow Bin. 

3. Slide the Bin back into place. Make sure it is pushed 

all the way in. 

 

 

 

2.2.5  PUTTING THE MACHINE ONLINE 

Press the ‘Online’ button.  The green ‘Online’ Indicator Light will illuminate.  The Z406 3D Printer is now 
ready to print. 

 

Technical Tip -  

Keep the Machine Clean! 

Make sure that you have enough powder to complete the build.  It is wise to always begin a build with a full feed 
box. 

CHECK THE OVERFLOW BIN! If the overflow bin becomes full, powder will back up through the system and 
cause errors with your printer.   

CHECK FLUID LEVELS! Make sure you have enough fluid to complete the build. Make sure the waste bottle is 
empty.  

Keep your Z406 3D Printer as clean as possible.  The cleaner it is, the better it will function. 

Carefully read the MSDS for binder and wash fluid before use.

 

 

Summary of Contents for Z 406







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands