Z406 System User Manual
Z Corporation
www.zcorp-users.com
21
4.
Unscrew and remove the
primary color binder bottle.
5. Fill the bottle up with binder.
Replace binder bottle in the
proper order – cyan, magenta,
yellow (from front to back).
2.2.4 CHECKING POWDER OVERFLOW BIN
1. Check the Overflow Bin at the right side of the
machine. Slide the Overflow Bin out and check the
level of powder. If the powder is more than half way
full, empty the Bin before proceeding.
WARNING: Do not recycle waste solution.
The waste is contaminated with powder
and use of this waste in the Z406 3D
Printer will clog the fluid system. Use
only binder supplied by Z Corporation.
Use of any other material may impact the
performance and safety of your Z406
System and will void warranty.
