Chapter 4
Configuration
14
3.
Now, you will see the log-in page of the IEEE 802.11N WIRELESS OUTDOOR CPE. The
default “Name” and “Password” are “
admin
” and “
password
” respectively. Enter them
and then click
Login
.
* Since the IEEE 802.11N WIRELESS OUTDOOR CPE covers “AP mode”, “Wireless
Client mode”, “Bridge mode” as well as “AP Repeater mode”, the following steps are
categorized for convenience reading to describe how to set each mode after successful
log-in.
AP Mode
1. Choose
Wireless > Basic Settings
. Then you will see the “Wireless Basic Settings” page.
The default is AP mode already. Here, you can set the parameters to optimize your
application, or you can leave them as the default. Click
Apply
to save the parameters.
In the example here, we only change the “Wireless Network Name (SSID)” as
“Join_me”, and later, we will show you if AP mode works correctly. In addition,
for better coverage of the AP, you may also use an external antenna; if so,
remember to set the antenna setting from “Internal (8 dBi)” to “External
(N-Type)” after your external antenna is successfully installed.
Note:
