Chapter 3
System Installation
8
Slide the cover back to seal the bottom of the IEEE 802.11N WIRELESS OUTDOOR
CPE.
4.
Take out the power cord and PoE injector, and plug the power cord into the DC port of the
PoE injector as the bottom right picture shows.
5.
Put what in the Step.3 and Step.4 together by plugging the other side of the Ethernet
cable in the Step.3 into the PoE port of the PoE injector in the Step.4. When you finish the
Step.5, the complete set will be like the following picture.
