Chapter 4
Configuration
22
There are two network modes available in IEEE 802.11N WIRELESS OUTDOOR CPE:
Bridge Mode and Router Mode. Users are recommended to pay attention to the
following warnings when they configure the network mode.
In AP mode, IEEE 802.11N WIRELESS OUTDOOR CPE must establish
connection with another wireless device before it is set to Router mode. In
Router mode, it is impossible for users to access device via wired port, for WAN
is on wired port and LAN is on wireless port. Users can access device through
the wireless device connected to IEEE 802.11N WIRELESS OUTDOOR CPE.
In CPE mode, users can access IEEE 802.11N WIRELESS OUTDOOR CPE
via its wired port, for WAN is on wireless port and LAN is on wired port when
device is set to Router mode.
WDS mode and AP Repeater mode are similar to AP mode when device is set
to Router mode; WAN is on wired port and LAN is on wireless port. Thus users
must also connect IEEE 802.11N WIRELESS OUTDOOR CPE with another
wireless device before it is set to Router mode and access IEEE 802.11N
WIRELESS OUTDOOR CPE via the connected wireless device.
Warning:
