Chapter 5
Troubleshooting
23
Chapter 5 Troubleshooting
1.
Why can’t I go to the log-in page, while I key in 192.168.1.1 in the address bar of the
web browser?
A: Make sure that the IEEE 802.11N WIRELESS OUTDOOR CPE is correctly connected
with you PC, and powered on already. Then make sure that the IP address of your PC is
set in the same network segment with the IEEE 802.11N WIRELESS OUTDOOR CPE,
which means that the IP address of your PC should be between 192.168.1.2 and
192.168.1.254.
2.
In the CPE mode, the quality of the connection is bad or unstable after choosing an
available access point to connect to. How can I solve it?
A: Since the IEEE 802.11N WIRELESS OUTDOOR CPE comes with the built-in directional
antenna, you should turn the IEEE 802.11N WIRELESS OUTDOOR CPE to face the
direction where the access point you connect to is located to get the best quality of the
connection. In addition, you can also click
Site Survey
in the “Wireless Basic Settings”
window to see the Signal Strength. If it is weak or unstable (the smaller the number is,
the weaker the signal strength is; please note that the signal strength comes with a
native sign with the numbers.), please choose another available access point or router
for better connection.
