Chapter 4
Configuration
20
AP Repeater Mode
1. Choose
Wireless > Basic Settings
. Then you will see the “Wireless Basic Settings” page.
Choose “AP Repeater” from Wireless Mode, and click
Apply
to save it. Feel free to
change the other parameters to optimize your application before clicking
Apply
.
For longer transmission of the IEEE 802.11N WIRELESS OUTDOOR CPE, you
may also use an external antenna; if so, remember to set the antenna setting
from “Internal (8 dBi)” to “External (N-Type)” after your external antenna is
successfully installed, otherwise
do not
set to ““External (N-Type)” without
external antenna, in case IEEE 802.11N WIRELESS OUTDOOR CPE has
damage....
Note:
