SECTION 5: SYSTEM CONTROL ELECTRONICS
YZ Systems Milton Roy • 201 Ivyland Road • Ivyland, PA • USA • 18974 • P: 281.362.6500 • www.yzsystems.com
NJEX ZEO Version 04/13/2021
Page 55
8.3.1. The Time Format can be set at
a 12 Hour or 24 Hour clock.
8.3.2. The Date Format can be set in
three
format
options
depending
on
user
preference.
8.4. After selecting the Date and Time
format, to modify the Time & Date,
open the parameter within the Time
& Date menu.
8.4.1. When adjusting the time, the
hours, minutes, and seconds
are adjusted as individual
parameters.
8.4.1.1. Press the Select Key
and if necessary, use
the Left Arrow Key or
Right Arrow Key to cycle to the hour parameter. Use the Up Arrow Key and
Down Arrow Key to adjust the hour as needed.
8.4.1.2. Press the Select Key to enter the Hour value and repeat to set the minutes
and seconds. If applicable, when in a 12 hour clock format, repeat to select
AM or PM.
8.4.2. When adjusting the date, the month, day, and year are adjusted as individual
parameters.
8.4.2.1.
Press the Select Key and if necessary, use the Left Arrow Key or Right
Arrow Key to cycle to the month parameter. Use the Up Arrow Key and
Down Arrow Key to adjust the month as needed.
8.4.2.2.
Press the Select Key to set the month parameter. Repeat to set the day
and year.
8.5. To confirm the date and time adjustment, use the navigation arrows to navigate to the
check mark icon displayed to the far right of the setting. Press the Select Key.
8.6. To cancel the date and time adjustment, use the navigation arrows to navigate to the X
icon displayed to the far right of the setting. Press the Select Key and the modification
will be cancelled.
IMPORTANT: If the clock resets to 12:00 XX/XX/XX, the backup battery BT1 may need to
be replaced. See
Appendix D for N-400 Controller replacement parts.
Please contact YZ
Technical Services for assistance on replacing BT1.
Figure 42 Time and Date Parameters