8
6.1 Variable pressure/constant volume
cylinders.
Spun cylinders may be installed in a horizontal
position on the DynaPak BackRack vessel rack.
Avoiding traps in the line, install stainless steel
tubing and fittings from the sample discharge port
of the sampler to the product end of the sample
cylinder.
300cc and 500cc spun cylinders may also be
installed in a vertical position. Piping from the
sampler dischage port to the sample vessel
should be arranged so that liquid traps are not
created.
6.2 Variable volume/constant pressure
cylinder.
The free-floating piston cylinder (DuraSite) may be
installed in a horizontal position on an optional
vessel rack. Free-floating piston cylinders should
NOT be installed on the DynaPak BackRack
vessel rack.
Install 1/8" tubing from the sample discharge port
of the manifold to the product end of the vessel.
Avoid traps in this line.
See diagram #9 for DuraSite portable sample
vessel instructions.
6.3 LinkPlus. Install the optional LinkPlus directly
into the sample discharge port of the sampler.
Use stainless steel tubing and fittings to connect
the LinkPlus outlet to the product end of the
sample cylinder.
6. Sample Vessel Installation