DP-2010L Version 04032001 ATEX Rev.
YZ Systems, Inc. • 3101 Pollok Drive • Conroe, Texas • USA • 77303 • P: 936.788.5793 • F: 936.788.5720
3
Congratulations on your purchase of the DynaPak
2010L Low Pressure Series Sampler. You've
made a wise measurement investment for your
company.
Before you begin installation, insure that all of the
necessary components are present. You will need
a sample cylinder(s) during the installation. If you
have questions concerning installation/operation,
contact your YZ representative or YZ Customer
Service at 936.788.5593. This sampler can
operate at pipeline pressures from 10 psig (.69
Bar) up to 1500 psig (103.4 Bar).
1949
Factory
System
Approved
Mutual
Sample Discharge
DynaPak 2000 Pump
Tubing
Purge Valve
Isolation Valve
Sample Discharge
Probe Body Assembly
Note:
Filter/Regulator
YZ SYSTEMS, INC.
3101 POLLOK DRIVE CONROE, TEXAS 77303
Z-65 Controller
Cable Entry Fitting
Solenoid Valve
Patents 5,152,678; 4,531,895; 4,928,536
Wiring and Pneumatic Tubing Not
Shown For Drawing Clarity
Sample Inlet
8" (20cm)
6" (15cm)
1. Introduction
2. System Components
The primary components of the DynaPak 2010L
Sampling System are illustrated here.
