background image

                                                                                                                                                        GSM/CDMA/WCDMA VoIP Gateway 

YX Technical department

                                                                                                                                                     

~ 48 ~

 

8.3.3 Date And Time 

The screenshot below shows the operation of date and time settings. 

 

The default time zone is UTC+8, you can change the time zone as your country. For example, 

Bangladesh is UTC+6, and change as +6. If your device is not touch with the internet and want to 

get accurate time, the time server will help. 

 

8.3.4 Remote Mangement 

The screenshot below shows the operation mode for remote management. 

 

Remote Management is used to manage the GoIP Gateways located in other physical locations. 

Network must be available for the gateway to communicate with ERM Server. 

If ERM is enabled and correctly set, the GoIP will register to ERM server and set up the 

connection between itself and ERM server. Administrator can login ERM server and monitor all the 

registered GoIP Gateways. Commands can also be sent from ETMS server to certain gateway for 

management. 

The configuration fields are specified as following: 

  Enable ERM: Specify whether enable ETMS registration or not. Option values are 

Enabled/Disabled. 

  ERM Server IP: Specify the ERM Server address. 

  ERM Server Port: Specify the ERM server port. 

  Account: Specify the account which create in the ERM. 

  Password: Specify the password which create in the ERM. 

  Status: Specify the registration status. 

 

8.4 Update/ backup & Restore 

The screenshot below shows the operation mode for system update/restore. 

Summary of Contents for YX Series




















































Reviews: