GSM/CDMA/WCDMA VoIP Gateway
YX Technical department
~ 26 ~
7.4.3 Hardware properties
The screenshot below shows the operation mode to set Hardware properties.
The columns are specified as following:
Port No: The GoIP Gateway mobile port. Each port contains one or four card slots. Port No
starts from 1 to 32.
Type: Values are GSM/CDMA/WCDMA. (According to your module.)
Disable: Specify whether enable or disable this port.
Bind SIM Card: The SIM card that not bind will be locked by gateway.
Input Volume: Specify the input voice volume of this port.
Output Volume: Specify the output voice volume of this port.
Balance: Shows the current balance of sim card
Operations:
Restart: Restart the module
More:
Hot-line: Specify a sip phone on the softswitch to pick up the incoming calls
UnconditionalForward/NoAnserForwardNumber/BusyForward: These parameters are
designed to be used with a third party system.
7.5 Basic Station
7.5.1 Basic Settings
The screenshot below shows the operation mode to set globally for base settings.
