23
V. If it's the first time you bind the slave remote to
the mast remote , please tap the Accept button on
the mast remote screen.
VII. Operation Method
1. Master remote can only control the drone , can't
control the gimbal and camera.
2. Tap the gimbal operation method select button ,
you can select the gimbal operation mode
2.1Same with the single remote mode
2.2 Joystick control mode, drone pitch joystick
controls the gimbal tilt; drone roll joystick controls
gimbal pan direction.
VI. Bind finished
Master remote Slave remote
NOTICE:
Tap Stop Team Mode Button you can exit team mode ,no matter on the Master remote or
the Slave remote
Landing
There are three ways to land the aircraft:
1.
Position the TYPHOON H3 above the area where you would like to land. Lower down the retract-
able landing gear, and then slowly lower the left-hand stick to below the center position. TYPHOON
H3 will descend slowly and land.
2.
Activate Home Mode and TYPHOON H3 will automatically fly itself back to the home point and
land.
3.
Press the icon ( ), then slide the sliding block, and the aircraft will land automatically.
WARNING: Always land as soon as possible after the first low level voltage battery warning, or land
immediately after the second level low voltage battery warning by the Motor LED Status Indicators
flashing rapidly.
Summary of Contents for TYPHOON H3
Page 1: ...USER MANUAL V1 0 ...
Page 49: ......
