Team mode
I. Power on the controller and drone waiting for the
communication established.
II. Power on a new controller , wait until it finishes
boot up
III. Open the Advanced mode menu, and tap the Team
mode on both master and slave remote screen.
IV. Slide the switch from the mast to slave on the
slave remote screen , and tap the ID of the master
remote for binding.
NOTICE:
Make sure that the slave remote hasn't con-
nected to any WiFi before switching to slave remote
22
Tap the [ ] icon to set a center point and set an ideal radius by controlling the joystick. The height
and radius data will be calculated automatically and indicated. Press the Start icon and push the Aile-
ron/Roll control stick, the aircraft will begin to execute POI. The Start icon will become the Pause icon.
The pilot can pause the the task by tapping it.
Orbit
When Orbit Me is enabled, TYPHOON H3 flies a circular path around the pilot. Press ORBIT to enter
the Orbit me function.
The center point will be the position where the ST16S is by default. Set an ideal radius by controlling
the joystick. The height and radius data will be calculated automatically and indicated. Press the Start
icon and push the Aileron/Roll control stick, the aircraft will begin to execute POI. The Start icon will
become Pause icon. The pilot can pause the the task by tapping it.
NOTICE:
When executing the Orbit function, we suggest you switch the gimbal tilt mode to angle
mode and gimbal pan mode to follow mode, then position the gimbal tilt slider and gimbal pan knob
to the centre position,to make sure the pilot are in the centre of the video, or you can use the gimbal
tilt slider and gimbal pan knob as a trim of your gimbal angle.
NOTICE:
When executing the Orbit/POI function the pilot can change the flight altitude
，
speed
，
and
radius by using the drone throttle,roll,and pitch joysticks.
POI
Center Point
Radius
Height
23.9 ft
28.9 ft
Pause
R
H
POI
Point of Interest allows the pilot to select a subject
they would like to orbit and have TYPHOON H3
orbit that subject autonomously.
Summary of Contents for TYPHOON H3
Page 1: ...USER MANUAL V1 0 ...
Page 49: ......
