YUKEN KOGYO ASE Series, Instruction Manual

Page: 11 / 82

EM-0146-8
- - 10
Table 2.5d AMSE Controller Specifications
Table 2.5e Facilities
Model
AMSE-4AE-
(AMSE-2AE-)
AMSE-4BB-
(AMSE-2BB-)
AMSE-4DE-
Voltage
3-phase, AC 380 to 480 V, 50/60 Hz
(3-phase, AC 200 to 220 V/50 Hz, AC 200 to 240 V/60 Hz)
Permissible Voltage
Fluctuation 3-phase, AC 323 to 528 V, 50/60 Hz
(3-phase, AC 170 to 242 V/50 Hz, AC 170 to 264 V/60 Hz)
Main Circuit
Power
Permissible Frequency
Fluctuation
± 5 % or less
Command Signal Input
Voltage
0 to 10 V DC (Pressure/flow command input)
Command Signal Input
Impedance
10 k Ω
Monitor Output Voltage
1ch. 0 to 10 V DC
(The output can be changed by parameters.)
Sequence Input Signal
12chs. Photocoupler input (current limiting resistance: 4.7 K Ω )
Power voltage: DC 21 to 27 V, short-circuited current: 4 to 6 mA
2chs. Relay output (contact capacity: AC 230 or DC 30 V, 0.3 A)
Interface
Sequence Output Signal
5chs. Open collector output (permissible load: DC 24 V, 0.1 A)
Cooling System Forced fan cooling, enclosed (IP20)
Ambient Temp. 0 to 50 °C (no freezing)
Ambient Humidity 90 %RH or less (no condensation)
Environmental
Condition
Vibration 5.9 m/s
2
or less
Protective Functions
□ Overcurrent □ Regenerative overvoltage □ AMSE controller overload
□ Motor overload □ Fin overheat □ Instantaneous power failure
□ Undervoltage □ Input open-phase □ Output open-phase
□ Stall prevention □ Ground fault overcurrent on the output side
□ Communication option error □ Parameter memory device error
□ CPU error □ Operation panel power short circuit
□ DC 24 power output short circuit □ Inrush current limiting circuit error
□ Analog input error □ Fan fault □ Electronic thermal pre-alarm
□ Dynamic brake pre-alarm □ PU stop □ Brake transistor error
□ Parameter write error □ Copy operation error □ Operation panel lock
□ Parameter copy alarm □ Communication error
□ USB communication error □ Internal circuit error
□ Maintenance signal output □ Error □ Hydraulic control board error
□ Hydraulic control board warning
ASE3- ASE5- ASE10- Model
4AA- AA- 4BZ- BZ- CE-
Power Capacity 27 kVA 28 kVA 41 kVA 80 kVA
Current Breaker 100 A frame
/60 A
225 A frame
/125 A
100 A frame
/100 A
225 A frame
/175 A
225 A frame
/175 A
Electromagnetic Switch N25 N50 N30 N80 N80