EM-0146-8
- -
3
■
Always follow the safety precautions
■
Never use the product in an explosive atmosphere where flammable gases or explosives are
handled. Doing so may result in a fatal accident, such as fire or explosion.
■
Never perform wiring, assembly, or maintenance/inspection work with the product powered on.
Doing so may cause electric shock, resulting in a fatal accident.
■
Before wiring, installation, relocation, or inspection, shut
off
the power supply and wait 15
minutes or more. When the CHARGE lamp of the AMSE controller turns off, perform a
voltage check using a tester and then conduct the work.
■
Do not use an input power supply not specified. Doing so may cause overheat, resulting in
fire.
■
Do not modify or disassemble the product. Doing so may impair safe operation.
■
Install the AMSE controller and regenerative resistors on nonflammable objects. Any
flammable object near them may be heated, causing fire.
■
Be sure to connect the ground wire as a precaution against electric shock in the event of earth
leakage. Never connect the ground wire to the following.
- Gas pipe - Lightning rod - Water pipe/faucet - Telephone line ground
■
Handling of emergencies
●
If the product begins to smoke
The continuous use of the product under abnormal conditions, such as smoking or unusual
odors, may result in fire or electric shock. Immediately shut off the power supply and
contact your local customer service after checking that the smoke has stopped. The repair
of the product by users is dangerous. The users should never attempt repairs.
●
If the product is broken
If the product is dropped or pulled down, immediately shut off the power supply and contact
your local customer service. Continuous use without taking corrective measures may result
in fire or electric shock.
●
If water gets into the product
If water gets into the product, immediately shut off the power supply and contact your local
customer service. Continuous use without taking corrective measures may result in fire or
electric shock.
■
Do not put any object in the pump. Doing so may damage the pump’s internal parts during
operation.
■
During operation or for some time after a power-off, the motor frame temperature is high.
Prevent hands or other body parts from contacting the frame in order to avoid burn.
■
Do not step on or put any heavy object on the product. Doing so may result in damage to the
product/equipment or injury from collapse/falling.
WARNING
DANGER
CAUTION
