43
http://www.yowzafitness.com/
COMPUTER OPERATION
PROGRAM 8
– WATTS CONTROL
The function of Watts Control program is to allow the user to set a desired workout load (watts). The user’s workout load is controlled
automatically by increasing or decreasing the RESISTANCE as the user changes their stride cadence (RPM). The RESISTANCE will be
reduced when user increases RPM and the RESISTANCE will be increased when the user decreases the RPM.
When you select this program, you are prompted to enter height, weight, gender, target WATTS and program time
. Use
+/- button to
adjust value and press ENTER to continue. Finally, press START to begin.
During the program, the upper body% and resistance level will not change unless you manually change it.
Time counts down to 0, Calories and Distance will count up. Press
RESISTANCE
+/- button
to adjust the resistance and press
UPPER
BODY%
+/- button to adjust the
upper body%
.
PROGRAM 9
–
TARGET HEART RATE CONTROL PROGRAM
The TARGET HEART RATE CONTROL program is designed to keep the user training at their chosen heart rate level to achieve the
proper workout result. A heart rate monitoring device must be used for this program: Contact Heart Rate Grips or Chest Belt Pulse
Transmitter. The equipment provides a standard contact handgrip on the moving handle bar to sense the user’s heart beat during the
workout. The user must hold the contact handgrips on the stationary handlebars constantly in order to monitor the user heart rate during
the workout. A wireless chest belt transmitter is highly recommended for this program since it provides the best most consistent
feedback.
When you select this program you will be asked for weight, and age. Based on your age it will recommend a Heart Rate. You can
change it to a different value at your discretion.
IMPORTANT: By default, console software will recommend the user’s recommended SAFE MAXIMUM HEART RATE based on
the formula: ((220pbm-AGE) X 8
5%). User’s are encouraged to consult with a doctor or training consultant to more accurately
estimate their SAFE MAXIMUM HEART RATE in order to workout safely. If you exceed your target heart rate the machine will
go into cool down mode automatically.
Fin
ally, the TIME di
splay shows factory default setting “16:00”. Press RESISTANCE
+/-
button to adjust the target time and press
PROGRAM/ENTER to confirm. Press Start to Begin.
Once the user successfully enters the HEART RATE CONTROL program, the com
puter will actively adjus
t the UPPER BODY% leve
l
and RESISTANCE level to keep the users at the TARGET HEART RATE throughout the program
– excluding first 3 minutes and last
minute (warm up and cool down).
