www.youfibercable.com
Email:[email protected] MSN:[email protected]
23
would be returned to fusion mode.
7.2.2 Enter into the parameter adjustment sub-menu
After the main menu was entered, the fiber type option could be
get by
ARC/+
or
X-Y/-
.
The menu as following:
SM:
To save single-mode fiber splicing parameter groups.
10 groups in total: 01~ 09 which can be changed.
MM:
To save multi-mode fiber splicing parameter groups.
10 groups in total: 01~ 09 which can be changed.
DS:
To save dispersion shift fiber splicing parameter groups.
10 groups in total: 01~ 09 which can be changed.
NZDS:
To save nonzero dispersion shift fiber splicing
parameter groups. 10 groups in total: 01~ 09 which
can be changed.
Para. Group: The current fusion splice parameters group.
7.2.3 Switch between Splice Parameter Groups
We give an example on how to select the SM1 splice parameter
group to clean the electrodes below.
a) As the screen in figure 7-1, move the cursor to Fiber type
option with
key or
key, and select "SM"
with
ARC/+
or
X-Y/-
.
b) Move the cursor to "Para. Group" with
key or key,
