31
STARTUP PROCEDURE
Once you have properly assembled your bike following the assembly video, ensuring all components
are correctly secured, and have read and understand this entire manual, you may start your bike.
a. Ensure battery key is in locked position. Remove key and carefully lift up on battery to make
sure it is secure.
b. Confirm correct handlebar and seat position. See Bike Adjustments section of this manual.
Ensure faceplate bolts and seat post quick release are completely secured.
c. Turn on your bike. Long press Power-On button until boot logo interface appears and then
release button. You will be on the Home Screen.
d.
Check lights. Short press “Light” button to manually turn on or off bike light if needed.
e. See Basic Function Operation section on page 40 to select PAS level, starting with level 0 or 1.
f. Begin ride: In safe location and with proper safety gear, begin pedaling.
g. Throttle: Always start with lowest PAS level and increase only when feeling comfortable. Short
press “+” or “–“ buttons to switch assist level and change assist mode up or down. See pg. 40.
⚠
CAUTION
Consult your physician before riding any bike if you have an impairment or disability that
could impact your ability to safely operate a vehicle.
As a parent or guardian, the activities and safety of your child is your responsibility, not
that of Young Electric. Young Electric bikes are not designed or recommended for
children under the age of 18.
