52
Handlebar
The position of the handlebars is a personal choice.
To adjust handlebar position:
-
Using Allen wrench to loosen the stem cap
screws securing handlebar to stem. Do not
remove screws.
-
Have the rider sit on bike seat with hands on
handlebar grips to move the handlebar to most
comfortable position.
-
Secure the stem cap screws with Allen wrench
used to loosen. Make sure they are tight, not
over tightened, and the handlebar is secure.
⚠
WARNING
-
Never ride with seat post raised beyond “Maximum Height Mark,” which is stamped on side
of seat post. Always keep a minimum of 2-
1/2” of seat post in seat tube. Failure to do so
may result in damage to bike and/or personal injury or death and may void warranty.
-
Be sure to tighten seat clamp/seat adjustment bolt properly, before first use. Failure to do
so may cause damage to the bike, property, loss of control, a fall, severe injury, or death.
Regularly check seat clamp for proper tightness.
